GAS SOLENOID VALVES N.C. 550 MBAR DIMENSIONS DN65 - DN100(DOSH & ST APPROVED)
GAS SOLENOID VALVES N.C. 550 MBAR DIMENSIONS DN65 - DN100(DOSH & ST APPROVED) GAS SOLENOID VALVES MANUAL RESET GECA GAS TRAIN EQUIPMENT GAS PRODUCT Selangor, Malaysia, Kuala Lumpur (KL), Puchong Supplier, Supply, Supplies, Services | LSA Energy Resources Sdn Bhd
GAS GAS solenoid valves have been designed to be combined with any gas detection system or carbon monoxide. Shut off the main outlet when an emergency situation is detected.
They have been installed at the gas piping and connected with a gas detector. Interrupt the gas flow in a danger situation.
The electro-valve is normally located after a filter, upstream of the regulation apparatus and preferably outside the measurement zone. It has been installed with the arrow stamped on the body turned towards the user appliance. Solenoide valve unscrew the protection cap and screw it down in the apposite threading and pull up.



logo CE nero0497 logo EAC nero

 

Standard Specification:

Power supply: 230 Vca – 24 Vcc/Vca – 12 Vcc/Vca
Body: aluminium
Working temperature: -15°C / +70°C
Closing time: < 1 sec
Max pressure: 550 mbar
Protection level: IP65
Connections: flanged UNI 2223
Weight: DN65=7.0Kg DN80=7.5Kg DN100=9.5Kg

 

TYPE CONNECTION FLOW POWER A MM B MM POWER SUPPLY
VR660/12 DN65 2” ½ 170 (mc/H) 6 W 246 395 12Vcc
VR660 DN65 2” ½ 170 (mc/H) 9 VA 246 395 230Vac
VR670/12 DN80 3” 170 (mc/H) 6 W 265 395 12Vcc
VR670 DN80 3” 170 (mc/H) 9 VA 265 395 230Vac
VR680/12 DN100 4” 280 (mc/H) 6 W 265 420 12Vcc
VR680 DN100 4” 280 (mc/H) 9 VA 265 420 230Vac
VR750/12 DN125 5” 280 (mc/H) 23 W 445 500 12Vcc
VR750 DN125 5” 280 (mc/H) 23 W 445 500 230Vac
VR751/12 DN150 6” 280 (mc/H) 23 W 445 500 12Vcc
VR751 DN150 6” 280 (mc/H) 23 W 445 500 230Vac

 

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version